Hydraulic Air Oil Cooler Suppliers in Chennai

Best Hydraulic Air Oil Cooler Suppliers in Chennai

Air-cooled aviation engines may be subject to “shock cooling” when descending from cruising altitude prior to landing. During descent, very little power is needed, so the engine is throttled back and thereby develops much less heat than when maintaining altitude. While descending, the plane’s airspeed rises, substantially increasing the rate of air-cooling the engine. These factors may cause the cylinder head to crack; but the adoption of oil-cooled cylinder heads significantly reduces or cancels the problem as the heads are now “oil-warmed”.

Why Choose SBKP Hydraulics?

• Competitive Pricing
• Quick Deliveries
• Prompt Pre and After Sales Support

SBKP Hydraulics by Leading Hydraulic/Lube Oil and Air Oil Systems Manufacturers

• CE, PED Compliant Oil Coolers
• Third Party Inspections Accepted
• Oil is already present as a lubricant, so no extra coolant tanks, pumps nor radiators are required (although all of these items may need to be larger than otherwise).
• Cooling water can be corrosive to the engine and must contain a Corrosion inhibitor/rust-inhibitor, whereas oil naturally helps to prevent corrosion.

Hydraulic cooler, Air oil cooler
This products features are as follows:

• Cooling capacity 937 kcal/h at ∆T=20°C, 1387 kcal/h at ∆T=30°C
• oil flow 35 l/min
• working pressure: 24 bar, testing pressure 36 bar
• working temperature: 120 °C
• Connection ports: 1/2″ BSP
• Electrical fan drive with 24 Volt